Roof Top Stick Mineral
Self-adhesive roofing membrane top layer
A high-quality self-adhesive roofing membrane for gently pitched roofs with a minimum pitch of 2° that ensures a waterproof roof. Its self-adhesive nature eliminates the need for cold glue or torching. This makes a self-adhesive roofing membrane the simplest and safest way to install a roof covering. The top layer has a peel-off film, making installation quick and easy. This top layer is made from high-quality elastomers and bitumen and has a polyester-glass combination insert. This makes the roll tear- and shrink-resistant. The unique composition of the bitumen makes this top layer strong, elastic and easy to work with. This top layer is finished with light grey slate granules for additional UV protection.
- Self-adhesive, glueing or heat welding is not required
- Quick and easy to apply
- Safe installation
Step-by-step plan
- First remove all dust and grease from the substrate. In the case of renovation, repair any blisters, cracks and tears in the weathered bitumen substrate with elastic ROOF REPAIR REGULAR. Reinforce with ANTI-CRACK, a tear-resistant polyester fleece. In the case of new construction, use ROOF BASE STICK as an underlay.
- Place the ROOF TOP STICK on the roof surface. Always start at the lowest point of the roof, i.e. the side with the rainwater outlet. Lay the ROOF TOP STICK in the same direction as the underlay or the existing roof covering used as an underlay, but staggered by 50 cm. To achieve this, halve the width of the first roll of roofing membrane.
- Unroll it to check the alignment. Then roll the ROOF TOP STICK back up halfway. Apply ROOF PRIMER STICK ACTIVATOR to the substrate where the roofing membrane will be installed to ensure good adhesion. Wait until the ROOF PRIMER STICK ACTIVATOR is dry to the touch (5 to 10 minutes).
- Carefully cut through the film without damaging the roll. Remove the peel-off film from the ROOF TOP STICK and firmly press the underlay onto the substrate. Press from the inside to the outside so that no air is trapped during unrolling. Press the seams well with a seam roller. Repeat with the other half of the roll.
- When installing the next roll of roofing, ensure an 8 cm overlap lengthwise. Cut the roll to size, roll it back up halfway, remove the peel-off film from the seams, remove the peel-off film from the roll and stick it using the same method.
- Ensure a 15 cm overlap in the width (the end seams between the rolls). Make sure the end seams are staggered relative to the underlying and adjacent roofing membranes.
- Finish the upstands with strips of ROOF TOP STICK. First apply ROOF PRIMER STICK ACTIVATOR to the upstands to ensure optimum adhesion. Wait until the ROOF PRIMER STICK ACTIVATOR is dry to the touch (5 to 10 minutes). Then apply the strips of ROOF TOP STICK. Ensure that the strips extend at least 10 cm onto the roof surface. First cover the upstands with strips.
Calculate how much product you need
* Zorgeloos genieten begint bij de juiste maten! Controleer uw gegevens goed voor u bestelt, want u bent zelf verantwoordelijk voor de juiste afmetingen.
Accessories
Technical features
| Variation | 6m |
|---|---|
| EAN | 5413466954629 |
| Material | Elastomeric bitumen (SBS) |
| Product use | Waterproofing for flat and pitched roofs |
| Volume | 6 |
| Volume Indication | M²/Roll |
| Expected lifespan (in years) | 35 |
| Top finish | Grey slate |
| Thickness (mm) | 4.2 |
| Length (mm) | 6000 |
| Width (mm) | 1000 |
| Surface area (m²) | 6 |
| Installation method | Fully self-adhesive, Pretreated with primer |
Related products
Our cookies are watertight
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.
The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance by your Internet Service Provider, or additional data from a third party, information stored or retrieved solely for this purpose cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles for sending advertising, or to track the user on a website or across multiple websites for similar marketing purposes.