Cold asphalt

Easily repair potholes and cracks in asphalt

Cars, changing temperatures, rain and frost all take their toll on your asphalt driveway or garden path. Over time, the surface begins to wear down. Small cracks can gradually turn into potholes and uneven areas, making your driveway or path not only look less attractive but also less safe to use. The good news? You don’t need a professional contractor or heavy machinery to carry out these repairs. With cold asphalt, you can quickly and easily repair damaged areas yourself using simple tools such as a brush, rake or asphalt tamper.

What is cold asphalt?

Unlike hot asphalt, which must be applied at high temperatures and requires specialist equipment and expertise, cold asphalt is ready to use at ambient temperature. Because no heating is required during application, CO₂ emissions are also significantly lower compared to traditional asphalt.

What causes cracks and potholes in asphalt?

Damage to asphalt usually develops gradually. Small cracks allow water to penetrate the surface, where it can freeze and expand during winter. As a result, cracks become larger and the surface continues to break down. Heavy use, high traffic loads or poor drainage can also lead to potholes and uneven areas. By repairing damage early, you can prevent the problem from getting worse. A quick repair not only extends the lifespan of your asphalt but also helps avoid more extensive renovations.

Repair gaps and potholes with ready-to-use cold asphalt

For localised damage such as potholes or gaps, Road Repair Asphalt Filler is the ideal solution. This ready-to-use cold asphalt was specially developed to quickly fill damaged areas without the need for heating or mixing. That makes it perfect for driveways, car parks, paths and small roads.

Benefits of Road Repair Asphalt Filler

  • Repairs potholes and gaps in asphalt.
  • Ready to use and easy to apply.
  • Quick solution for localised damage.
  • Apply, tamp down and you’re done!

How to apply it

  • Clean the surface well with a wire brush and remove any loose dirt and debris.
  • For deeper damage, apply a base layer of well-compacted crushed stone first.
  • Apply the cold asphalt (maximum 3 cm per layer) and compact it firmly using a tamper.
  • Allow the repair to dry for at least 24 hours before using the surface again.
  • Your tools can easily be cleaned with white spirit.
Thanks to this quick repair method, your driveway or garden path will be safe to use again in no time.

Give worn asphalt a new protective layer

Has your asphalt become damaged, worn or dull over time? Then a renovation treatment with Road Repair Asphalt Refresh can make all the difference. This elastic bitumen emulsion nourishes the existing asphalt surface and fills small hairline cracks. This helps prevent water and frost from causing further damage. The formula also contains special fillers that provide an anti-slip finish.

Benefits of Road Repair Asphalt Refresh

  • Renews and protects asphalt.
  • Fills small cracks and fissures.
  • Anti-slip finish for added safety.
  • Easy to apply.

Important tips

  • Have you filled holes first using Road Repair Asphalt Filler? Then wait at least one month before applying the Road Repair Asphalt Refresh coating.
  • Apply the product using a brush or floor squeegee at temperatures between 10°C and 25°C.
  • Your tools can simply be cleaned with water.
  • Allow to dry for at least 24 hours for the best results.
The renewed asphalt layer gives your driveway or path a fresh, well-maintained look while improving its resistance to the elements.

Small repair, big difference

Asphalt damage may seem harmless at first, but it can quickly worsen due to water, frost and heavy use. By repairing damage in time with Aquaplan solutions, your driveway or path will remain in top condition for longer. Did you know that cold asphalt can also serve as an excellent base for further finishing? While the material is still tacky, you can sprinkle decorative gravel onto the surface for an attractive finish. It can also be used as a stable base for paving stones. Are you looking for the right product for your project? Visit your local retailer and discover which Aquaplan solution best suits your driveway, path or car park.