Roof Primer Stick Activator

Pre-treatment agent for self-adhesive roofing membranes

A black, ready-to-use pre-treatment agent to promote adhesion of self-adhesive bitumen roofing membranes. The use of Roof Primer Stick Activator activates the adhesive power of self-adhesive bitumen roofing membrane, resulting in excellent adhesion even in non-ideal conditions. Roof Primer Stick Activator is easy to apply. Remove the peel-off film from the self-adhesive bitumen roofing roll and place it on the treated surface.

Improves adhesion of self-adhesive roofing membranes
Easy to apply, only applied to one side
Dries very quickly (5 – 10 minutes)

Find points of sale

Step-by-step plan

Remove all dust and grease from the substrate.
Spray one thin coat of primer on the substrate or use a roller. Distribute the primer evenly.
Wait 5 to 10 minutes (at 10°) so the solvents can evaporate.
Apply an Aquaplan self-adhesive roofing membrane on the prepared substrate. Do not forget to remove the peel-off film from the membrane; press firmly.

Calculate how much product you need

* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Technical features

Variation	Spray 750 ml5 l
EAN	54134669549885413466954971
Material	PolymerPolymer
Product use	Pre-treatPre-treat
Volume	0.755
Volume Indication	LL
Color	blackblack
Suitable for part of building	Flat roofsFlat roofs
Required tools	brush, foam roller
Minimum processing temperature	55
Maximum application temperature	3030
Drying time (in hours)	0.120.15
Overpaintable	Not applicableNot applicable
Overpaintable after (hours)	Niet van toepassingNiet van toepassing

Safety features

H-statements	H222 - Extremely flammable aerosol.
	H229 - Pressurized container: May burst if heated
	H315 - Causes skin irritation.
	H336 - May cause drowsiness or dizziness.
	H411 - Toxic to aquatic organisms, with long lasting effects.

P-statements	P210 - Keep away from heat/sparks/open flames/hot surfaces and other ignition sources. - Do not smoke.
	P211 - Do not spray on an open flame or other ignition source.
	P251 - Do not pierce or burn, even after use.
	P260 - Do not breathe dust/fume/gas/mist/vapour/spray.
	P280 - Wear protective clothing.
	P410+P412 - Protect from sunlight. Do not expose to temperatures above 50°C/122°F.
	P501B - Dispose of contents/container in accordance with local regulations.