Roof Primer Roofing

Bonding varnish for roofs

A bituminous bonding varnish for roofs that ensures a faster drying time and excellent adhesion. The quick-drying primer fixes residual dust and significantly improves the adhesion between the substrate and the newly applied bitumen roofing membrane.

  • Ensures optimum adhesion
  • Dries quickly
  • Easy to apply

Step-by-step plan

  1. Make the substrate dust- and grease-free.
  2. Apply a layer of ROOFPRIMER by brush or roller at a rate of 0.2 L/m². Lower consumption applies to surfaces other than bitumen; higher for concrete.
  3. Let the adhesive varnish dry for min. 3 h.
  4. Finish further with bituminous roof rolls and/or coatings.
  5. Laying compound cannot be used directly on Roof Primer.

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Technical features

Dimensions 11,1 × 11,1 × 13,2 cm
Variation

Roof Primer Roofing 1 lRoof Primer Roofing 4 l

EAN

54134664103095413466937295

Volume

14

Color

BlackBlack

Content indication

LL

Material

BitumenBitumen

Product use

Pre-treatPre-treat

Required tools

brush or rollerbrush or roller

Minimum processing temperature

55

Maximum processing temperature

3535

Dry time (in hours)

0.50.5

Repaintable

TrueTrue

Repaintable after (hours)

11

Suitable for part of building

Flat roofsFlat roofs

Safety features

H-phrases H226 - Flammable liquid and vapour.
H304 - Can be fatal if swallowed and enters airways.
H336 - May cause drowsiness or dizziness.
H412 - Harmful to aquatic organisms, with long lasting effects.
P-phrases P102 - Keep out of reach of children.
P210 - Keep away from heat/sparks/open flames/hot surfaces and other ignition sources. - Do not smoke.
P241 - Use explosion-proof electrical/ventilation/lighting/... equipment.
P261 - Avoid breathing dust/fume/gas/mist/vapour/spray.
P303+P361+P353 - IF ON SKIN (or hair): Remove contaminated clothing immediately. Rinse skin with water/shower.
P403+P233 - Store in a well-ventilated place. Store in tightly closed container.
P501B - Dispose of contents/container in accordance with local regulations.
EUH-phrases EUH066 - Repeated exposure may cause dry or cracked skin.
Pictograms GHS02 - flame
GHS07 - exclamation mark
GHS08 - health hazard
UFI-code 8Y4M-K83C-400W-99S3
IMDG-code UN 1268, Petroleum products, n.o.s., 3, III, (24°Cc.c.)