Roofprimer Spray
Bonding varnish for roofs
Quick-drying bitumen primer for activating and preparing substrates to which bitumen roofing products will be applied. The quick-drying spray fixes remaining dust and significantly improves the adhesion between the substrate and the newly applied bitumen roofing membrane.
- Dries quickly
- For all substrates
- Optimum adhesion
Step-by-step plan 
Technical features 
Safety features 
Related products
Step-by-step plan
- Remove all dust and grease from the substrate.
- Before use, shake the spray can vigorously until the pea can be heard.
- Apply 1 thin coat of ROOF PRIMER SPRAY to a dry surface.
- Ensure a distance of approx. 30 cm between the nozzle and the surface.
- Allow the primer to dry for 30 minutes before applying any products.
- After use, hold the can upside down and press the nozzle for a few seconds to release some of the primer and prevent clogging.
Technical features
| Variation | 500ml |
|---|---|
| EAN | 5413466938605 |
| Material | Bitumen |
| Product use | pre-treat |
| Volume | 0.5 |
| Volume Indication | L |
| Color | black |
| Suitable for part of building | Flat roofs |
| Required tools | aerosol sprayer |
| Minimum processing temperature | 5 |
| Maximum application temperature | 35 |
| Drying time (in hours) | 0.5 |
| Overpaintable | Not applicable |
| Overpaintable after (hours) | Niet van toepassing |
Safety features
| H-statements | H226 - Flammable liquid and vapour. |
|---|---|
| H336 - May cause drowsiness or dizziness. | |
| H304 - Can be fatal if swallowed and enters airways. | |
| H412 - Harmful to aquatic organisms, with long lasting effects. |
| P-statements | P102 - Keep out of reach of children. |
|---|---|
| P210 - Keep away from heat/sparks/open flames/hot surfaces and other ignition sources. - Do not smoke. | |
| P241 - Use explosion-proof electrical/ventilation/lighting/... equipment. | |
| P261 - Avoid breathing dust/fume/gas/mist/vapour/spray. | |
| P303+P361+P353 - IF ON SKIN (or hair): Remove contaminated clothing immediately. Rinse skin with water/shower. | |
| P403+P233 - Store in a well-ventilated place. Store in tightly closed container. | |
| P501B - Dispose of contents/container in accordance with local regulations. |
| EUH-statements | EUH066 - Repeated exposure may cause dry or cracked skin. |
|---|
| Pictograms |
GHS02 - flame
|
|---|---|
GHS07 - exclamation mark
|
|
GHS08 - health hazard
|
| UFI-code | 8Y4M-K83C-400W-99S3 |
|---|
| IMDG-code | UN 1268, Petroleum products, n.o.s., 3, III, (24°Cc.c.) |
|---|
