Polyester Connectors
Connectors for joining polyester edge trim
Aquaplan’s Polyester Connectors are a part of the Black Edge Trim range. These connectors give you optimal results when installing your edge trim. They come in a set of 4 corner pieces and 10 straight pieces.
- Ensures optimum installation of edge trim
- Easy to use
- Come in a set
Related products
Step-by-step plan
- Place the edge trim on the underlay of your roof.
- Fasten with our Edge Trim Screws 5 cm from the end of the edge trim, then fasten a new screw every 25 cm.
- Take a straight POLYESTER CONNECTOR and insert it into the vertical section of the next edge trim. Place this next edge trim 2 mm from the previous one.
- Finally, place the top layer of your roof covering over the edge trim. To ensure a waterproof finish, seal the edge trim under the upper lip with ROOF SEAL MASTIC.
- How do I use black edge trim with EPDM? Place the edge trim on the EPDM layer of your roof.
- Fasten with our Black Edge Trim Screws 5 cm from the end of the edge trim, then fasten a new screw every 25 cm. These screws have an EPDM washer, so additional sealing is not necessary.
- Then take a straight connector piece and place it in the vertical part of your next roof edge profile. Place this next roof edge profile 2 mm from the previous one.
- To make a corner, you can easily cut two roof edge profiles at a mitre. Use a corner connector to ensure a perfect fit.
Technical features
| Variation | Polyester Connectors |
|---|---|
| EAN | 5413466958023 |
| Material | Polyester |
| Product use | Installation of roof edge profiles |
| Volume | 1 |
| Volume Indication | Stuk(s) |
| Color | Noir |
| Thickness (mm) | 80 |
| Length (mm) | 77 |
| Width (mm) | 77 |
