Black Edge Trim

The aesthetic finish of your flat roof

Finish your roof in style with our Black Edge Trim. It is made from high-quality polyester, to which fibreglass has been added. This makes our Black Edge Trim very sturdy and impact-resistant. It is impervious to ageing and weather conditions. The edge trim will not rust or oxidise, even where it is cut.

  • A stylish finish to your roof
  • Strong and shock-resistant
  • Resistant to atmospheric influences

Step-by-step plan

  1. Place the edge trim on the underlay of your roof.
  2. Fasten with our Edge Trim Screws 5 cm from the end of the edge trim, then fasten a new screw every 25 cm.
  3. Take a straight POLYESTER CONNECTOR and insert it into the vertical section of the next edge trim. Place this next edge trim 2 mm from the previous one.
  4. Finally, place the top layer of your roof covering over the edge trim. To ensure a waterproof finish, seal the edge trim under the upper lip with ROOF SEAL MASTIC.
  5. How do I use black edge trim with EPDM? Place the edge trim on the EPDM layer of your roof.
  6. Fasten with our Black Edge Trim Screws 5 cm from the end of the edge trim, then fasten a new screw every 25 cm. These screws have an EPDM washer, so additional sealing is not necessary.
  7. Then take a straight connector piece and place it in the vertical part of your next roof edge profile. Place this next roof edge profile 2 mm from the previous one.
  8. To make a corner, you can easily cut two roof edge profiles at a mitre. Use a corner connector to ensure a perfect fit.

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Accessories

Technical features

Dimensions 200 × 6 × 6,5 cm
Variation

Black Edge Trim 2 m

EAN

5413466957804

Volume

1

Color

Noir

Content indication

Stuk(s)

Material

Polyester

Product use

Finish roof

Thickness (mm)

65

Width (mm)

60

Length (mm)

2000