0
Roof Coating Regular
Semi-liquid renovation coating
A maintenance coating reinforced with fibres for repairing, protecting and waterproofing flat and gently pitched bitumen roofs and gutters. Once dry, Roof Coating Regular forms a highly adhesive, slightly elastic coating that seals all pores and micro-cracks.
- Repair and renovation of flat roofs and gutters
- Seals pores, cracks and fissures
- Prevents premature ageing of your roof sealant
Step-by-step plan
- First remove all dust and grease from the substrate.
- Repair blisters, cracks and tears with ROOF REPAIR REGULAR or ROOF SEAL MASTIC SBS. If necessary, reinforce with ANTI-CRACK, a tear-resistant polyester fleece. Allow to dry sufficiently (about one week) before proceeding.
- Clean and impregnate the substrate with quick-drying ROOF PRIMER ROOFING bituminous bonding varnish to ensure optimum adhesion.
- Apply two cross coats of ROOF COATING REGULAR with a brush or roller. Use about 0.5 kg/m² per coat and protect each coat from rain, frost and mist for at least 4 hours.
- The initial brown colour becomes completely black.
- Apply the second coat only after the first coat has fully cured. This takes 24 to 36 hours. Slate granules can be sprinkled into the last wet coat for additional UV protection.
Calculate how much product you need
Worry-free enjoyment starts with accurate measurements! Please double-check your measurements before ordering. You are responsible for ensuring that the dimensions are correct.
Technical features
| Variation | 1kg4kg4kg + 0,8kg10+2kg |
|---|---|
| EAN | 5413466944064541346694407154134669440885413466944095 |
| Material | BitumenBitumenBitumenBitumen |
| Product use | renovaterenovaterenovaterenovate |
| Volume | 144.812 |
| Volume Indication | KGKGKGKG |
| Color | BlackBlackBlackblack |
| Suitable for part of building | Flat roofsFlat roofsFlat roofsFlat roofs |
| Required tools | brush, foam rollerbrush, foam rollerbrush, foam rollerbrush, foam roller |
| Minimum processing temperature | 5555 |
| Maximum application temperature | 35353535 |
| Drying time (in hours) | 24242424 |
| Overpaintable | FalseFalseFalseFalse |
| Overpaintable after (hours) | Niet van toepassingNiet van toepassingNiet van toepassingNiet van toepassing |
Safety features
| H-statements | H302 - Harmful if swallowed. |
|---|---|
| H315 - Causes skin irritation. | |
| H317 - May cause an allergic skin reaction. | |
| H318 - Causes serious eye damage. | |
| H400 - Very toxic to aquatic organisms. |
| P-statements | None |
|---|
| EUH-statements |
EUH208 - Contains |
|---|
| Pictograms | None |
|---|
| UFI-code | None |
|---|
| IMDG-code | None |
|---|
Related products
Our cookies are watertight
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.
The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance by your Internet Service Provider, or additional data from a third party, information stored or retrieved solely for this purpose cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles for sending advertising, or to track the user on a website or across multiple websites for similar marketing purposes.