Home Products Coatings Roof coatings Roof Coating Expert
0

Roof Coating Expert

Instant waterproofing in one layer

Roof Coating Expert provides instant waterproofing that repairs and renovates your roof in one layer. The crack-filling, elastic and waterproof repair layer is suitable for repairing almost any substrate without needing an adhesive layer. Roof Coating Expert can also be used in slightly rainy weather.

  • Repairs and renovates your roof in one layer
  • Excellent adhesion to all kinds of substrates
  • Flexible, permanently elastic, resistant to ageing
Find points of sale

Step-by-step plan

  1. Ensure that the dry or slightly damp substrate is free of dust and grease. Do not apply to water-saturated substrates or areas that are constantly flooded or covered with ice.
  2. Stir Roof Coating Expert well and apply a single coat thickly and evenly with a brush, roller or floor squeegee at a rate of 0.9–1.8 l/m². The amount of product required depends on the type of substrate and the degree of damage. Roof Coating Expert is rainproof and dust dry after 3 hours at 20°C.
  3. In extreme cases, a second coat can be applied after 8 days for additional UV protection.
  4. The product does not dry out and remains liquid. Close the can tightly after use.

Documents

Manual
Safety sheet

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Technical features

Dimensions 11,1 × 11,1 × 13,2 cm
Variation

Roof Coating Expert 0.75 lRoof Coating Expert 4 lRoof Coating Expert 10 l + 2 l
EAN

541346601085154134660108685413466020683
Volume

0.75412
Color

GreyGreyGrey
Content indication

LLL
Material

AcrylicAcrylicAcrylic
Product use

Waterproof and protectWaterproof and protectWaterproof and protect
Required tools

brush, roller or floor squeegeebrush, roller or floor squeegeebrush, roller or floor squeegee
Minimum processing temperature

-5-5-5
Maximum processing temperature

353535
Dry time (in hours)

333
Repaintable

Not applicableNot applicableNot applicable
Repaintable after (hours)

Niet van toepassingNiet van toepassingNiet van toepassing
Suitable for part of building

Gutters, Flat roofsGutters, Flat roofsGutters, Flat roofs

Safety features

H-phrases H226 - Flammable liquid and vapour.
H336 - May cause drowsiness or dizziness.
P-phrases P102 - Keep out of reach of children.
P210 - Keep away from heat/sparks/open flames/hot surfaces and other ignition sources. - Do not smoke.
P261 - Avoid breathing dust/fume/gas/mist/vapour/spray.
P303+P361+P353 - IF ON SKIN (or hair): Remove contaminated clothing immediately. Rinse skin with water/shower.
P304+P340 - IF INHALED: Remove the person to fresh air and keep them breathing easily.
P501B - Dispose of contents/container in accordance with local regulations.
EUH-phrases EUH208 - Contains . May cause an allergic reaction.
Pictograms GHS02 - flame
GHS07 - exclamation mark
UFI-code 25FM-Q8XT-W00U-2U40
IMDG-code UN 1263, Paint related material, 3, III, (44°C c.c.)"Transport in accordance with 2.3.2.5 of theIMDG code"