Tile Leaf Catcher
Prevents blockages
This plastic leaf catcher ensures optimal, faster and unobstructed water drainage on flat roofs. It prevents blockages from gravel, leaves, etc. The leaf catcher is covered with a 30 cm x 30 cm tile.
- For more, faster and unobstructed rainwater drainage on flat roofs
- Prevents clogging problems caused by gravel, leaves, etc.
- Cover/reinforce with a 30×30 cm tile
Related products
Step-by-step plan
- Place the leaf trap above the drain and lay a 30 x 30 cm tile on the plastic frame.
- First remove all dust and grease from the substrate.
- Stir Foundation Protect Regular well before use.
- Apply at least two undiluted cross coats of Foundation Protect Regular with a brush or roller at a rate of 0.3 l/m² per coat. A third coat is recommended for masonry. Protect each coat from rain for at least 4 hours.
- Only apply the next coat after the previous coat has fully cured. This takes about 24 hours.
Technical features
| Dimensions | 30 × 30 × 8 cm |
|---|---|
| Variation | Leaf Catcher large (tile) 30 x 30 |
| EAN | 5413466938674 |
| Volume | 1 |
| Color | Noir |
| Content indication | Stuk(s) |
| Material | Synthetic |
| Product use | Preventing blockages |
| Thickness (mm) | 80 |
| Width (mm) | 300 |
| Length (mm) | 300 |
