Roof Primer EPDM

Primer for EPDM

A quick-drying primer to neutralise dusty, powdery and/or porous substrates and ensure optimum adhesion of your EPDM roof. Apply Roof Primer EPDM to old bitumen roofing, wood and concrete before bonding your EPDM Rubber Roof.

Ensures optimum adhesion
Dries quickly
For all substrates

Find points of sale

Step-by-step plan

Make the substrate dust- and grease-free.
Apply a layer of Special Primer EPDM by brush or roller at a rate of 0.2 L/m². For surfaces other than bitumen, lower consumption applies.
Let the adhesive varnish dry for min. 3 h.
Finish further with a 1-piece EPDM foil.

Calculate how much product you need

* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Technical features

Variation	4L
EAN	5413466945320
Material	Bitumen
Product use	Pre-treat
Volume	4
Volume Indication	L
Color	Black
Suitable for part of building	Flat roofs
Required tools	brush, foam roller
Minimum processing temperature	5
Maximum application temperature	35
Drying time (in hours)	0.5
Overpaintable	True
Overpaintable after (hours)	1

Safety features

H-statements	H226 - Flammable liquid and vapour.
	H304 - Can be fatal if swallowed and enters airways.
	H336 - May cause drowsiness or dizziness.
	H412 - Harmful to aquatic organisms, with long lasting effects.

P-statements	P102 - Keep out of reach of children.
	P210 - Keep away from heat/sparks/open flames/hot surfaces and other ignition sources. - Do not smoke.
	P241 - Use explosion-proof electrical/ventilation/lighting/... equipment.
	P261 - Avoid breathing dust/fume/gas/mist/vapour/spray.
	P303+P361+P353 - IF ON SKIN (or hair): Remove contaminated clothing immediately. Rinse skin with water/shower.
	P403+P233 - Store in a well-ventilated place. Store in tightly closed container.
	P501B - Dispose of contents/container in accordance with local regulations.