Home Products Insulation Accessories Iso-Fill

Iso-Fill

Material for fastening IKO enertherm roof insulation

Iso-Fill is a special insulation foam for filling, sealing and insulating gaps between insulation boards and building structures. It is suitable for indoor and outdoor applications.

  • Fills gaps between insulation boards and building structures
  • Insulates, fills and seals
  • Both indoors and outdoors
Find points of sale

Step-by-step plan

  1. Remove all dust, dirt and grease from the substrate.
  2. It is advisable to lightly moisten highly absorbent substrates first.
  3. Shake the can vigorously for 20 seconds with the nozzle facing down.
  4. Remove the cap and put on the gloves. Screw the tube onto the nozzle.
  5. Hold the can with the nozzle facing down and fill the opening, working from the bottom upwards. Use a zigzag motion for openings wider than 3 cm. Do not fill the entire opening because the foam increases in volume.
  6. If the volumes to be filled are too large, work layer by layer, spraying with water between each layer.
  7. When taking a break of longer than 5 minutes, the tube must be cleaned, and the can must be shaken vigorously before using it again.
  8. Any excess foam can be removed with a knife after curing.

Technical features

Variation

Insulation Foam 500 ml
EAN

5413466948581
Material

Polyurethane
Product use

filling
Volume

0.5
Volume Indication

L
Color

white
Suitable for part of building

Slanted roofs
Minimum processing temperature

5
Maximum application temperature

35
Drying time (in hours)

0
Overpaintable

False
Overpaintable after (hours)

Niet van toepassing

Safety features

H-statements H222 - Extremely flammable aerosol.
H229 - Pressurized container: May burst if heated
H317 - May cause an allergic skin reaction.
H319 - Causes serious eye irritation.
H332 - Harmful by inhalation.
H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335 - May cause respiratory irritation.
H351 - Suspected of causing cancer .
H362 - May be harmful through breastfeeding.
H373 - May cause damage to organs through prolonged or repeated exposure .
H413 - May have long lasting harmful effects on aquatic organisms.
P-statements P102 - Keep out of reach of children.
P260 - Do not breathe dust/fume/gas/mist/vapour/spray.
P263 - Avoid contact during pregnancy or breastfeeding.
P271 - Use only outdoors or in a well-ventilated area.
P280 - Wear protective clothing.
P302 - ON SKIN CONTACT:
P304 - AFTER INHALATION:
P305 - IF IN EYES: → Immediately rinse gently with water.
P308 - AFTER (possible) exposure:
P313 - Consult a doctor.
P338 - Remove contact lenses, if possible. Continue rinsing.
P340 - Remove the person to fresh air and allow them to breathe easily.
P351 - Rinse gently with water for several minutes.
P352 - Wash with plenty of soap and water.
P501B - Dispose of contents/container in accordance with local regulations.
EUH-statements EUH204 - Contains isocyanates. May cause an allergic reaction.
Pictograms GHS02 - flame
GHS07 - exclamation mark
GHS08 - health hazard
UFI-code None
IMDG-code None