Glue Roofing Roll with Slate Granules 7,5m

Step-by-step plan

1. Always work on a clean, even and dry substrate.
2. Always provide a slope of at least 2 cm per metre of roof pitch to prevent the formation of puddles.
3. With a new wooden roof structure, always work with a bottom and top layer and use waterproof sheets of min. 18 mm thick or impregnated wooden boards.
4. Always work from the lowest point of the roof slope and install the underlay in scales with an overlap of 7 to 10 cm so that a homogeneous and waterproof roof covering is already obtained.
5. Attach ROOF BASE FIX by nailing down all sides every 25 cm with ROOF NAILS.
6. If you don’t have a wooden roof structure, you can glue the roofing. Apply one coat of ROOF GLUE to the substrate with a floor squeegee or brush. Place the roll in the glue and unroll it. Make sure the glue is spread over the entire width of the roll. If necessary, add some more glue.
7. Seal the overlap with ROOF GLUE and nail it down every 15 cm with ROOF NAILS.