Home Products Adhesives and Primers Cold Glue Roof Glue Roofing
0

Roof Glue Roofing

Fibre-reinforced cold glue for roofing membranes

A fibre-reinforced bituminous cold glue for fast and risk-free bonding of roofing membranes to the substrate. Roof Glue Roofing ensures a strong and homogeneous bond that prevents moisture and air bubbles and makes blistering impossible. An additional benefit of this cold glue is that it preserves the full thickness of your roofing membranes.

  • Glueing preserves the full thickness of the roofing membrane.
  • The cold glue acts as an extra layer of waterproofing and fills small cracks and uneven areas
  • Strong and homogeneous bonding that prevents moisture and air bubbles and makes blistering impossible
Find points of sale

Step-by-step plan

  1. First dry the substrate and remove all dust and grease.
  2. Mix the product well with a mechanical mixer to obtain a homogeneous mixture.
  3. Repair blisters, cracks and tears in the weathered bitumen substrate with ROOF REPAIR REGULAR or the elastic ROOF SEAL MASTIC SBS sealant. If necessary, reinforce with ANTI-CRACK, a tear-resistant polyester fleece.
  4. Clean and impregnate the substrate with quick-drying ROOF PRIMER ROOFING bituminous bonding varnish (max. drying time 3 hours) to ensure optimum adhesion.
  5. Apply 1 coat of cold ROOF GLUE ROOFING with a brush or floor squeegee at a rate of approx. 1 kg/m².
  6. Roll out an entire roll of roofing (polyester and/or glass fleece inlay) onto the freshly applied glue and press down.
  7. Press the overlaps (approx. 7 cm) firmly and smooth them out with a putty knife. Weigh down the seams for about 24 hours.
  8. TIP: Consult the detailed installation instructions for a professional roof on various substrates. For pitches greater than 15%, mechanically fasten the roofing membrane on the highest side to prevent slipping. Use special, galvanised SHINGLE & ROOF NAILS.

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Technical features

Dimensions 11,1 × 11,1 × 13,2 cm
Variation

Roof Glue Roofing 1 kgRoof Glue Roofing 5 kgRoof Glue Roofing 10 kg + 20%Roof Glue Roofing 20 kg
EAN

5413466350308541346635050654134660207065413466351008
Volume

151220
Color

BlackBlackBlackblack
Content indication

KGKGKGKG
Material

BitumenBitumenBitumenBitumen
Product use

GlueGlueGlueGlue
Required tools

brush or floor squeegeebrush or floor squeegeebrush or floor squeegeebrush or floor squeegee
Minimum processing temperature

-5-5-5-5
Maximum processing temperature

30303030
Dry time (in hours)

24242424
Repaintable

Not applicableNot applicableNot applicableNot applicable
Repaintable after (hours)

Niet van toepassingNiet van toepassingNiet van toepassingNiet van toepassing
Suitable for part of building

Flat roofsFlat roofsFlat roofsFlat roofs

Safety features

H-phrases H226 - Flammable liquid and vapour.
P-phrases P102 - Keep out of reach of children.
P210 - Keep away from heat/sparks/open flames/hot surfaces and other ignition sources. - Do not smoke.
P241 - Use explosion-proof electrical/ventilation/lighting/... equipment.
P280 - Wear protective clothing.
P303+P361+P353 - IF ON SKIN (or hair): Remove contaminated clothing immediately. Rinse skin with water/shower.
P403+P235 - Store in a well-ventilated place. Keep cool.
P501B - Dispose of contents/container in accordance with local regulations.
EUH-phrases None
Pictograms GHS02 - flame
UFI-code MCAM-F8KC-F002-YTG5
IMDG-code UN 1268, Petroleum products nos, 3, III, (36°Cc.c.)