Aqua Tile 2 m Classic
Lay 65 roof tiles in 1 single movement
Universal 2 m² galvanised metal tile roofing sheet for all pitched roofs. It allows you to install 65 tiles in one go, and the adapted tile profile for smaller roof areas provides a more aesthetic final result. Each sheet is 5 tiles wide and 13 tiles high. Its ingenious design (65 tiles per sheet) makes it suitable for any roof. The tiles can be overlapped both vertically and horizontally without cutting and/or trimming. Quick, easy and no waste, which is good for the environment.
- Flat tile with a modern look
- Easy & fast installation
- Apply directly to existing roof covering
Step-by-step plan
- How does our AQUA TILE system work?
- Place a chalk line about 5 cm from the top of the ridge. This will be the top of the top row of roofing sheets.
- Place verge caps on both sides of the roof. Distribute them evenly up to the chalk line. Screw them in place with at least 2 screws. Each verge cap is provided with a neutral zone of up to 7.5 cm. This space is used to unify a proportional distribution of plates.
- Always work per full row, from left to right and bottom to top.
- Distribute the bottom row of sheets evenly between the verge caps and secure them at the bottom with 2 screws.
- Screw each sheet in place with the materials developed for this purpose. Use 6 screws (Gallo/Ebena) or 9 screws (Classic) per sheet. Always screw into the valley of the tile about 2 cm below the nose.
- The top row of sheets should more or less reach the chalk line.
- Then seal the ends of the ridge with a ridge cap end by fixing the end piece on top of the verge caps. Distribute the ridge caps evenly along the entire length of the roof. Screw them in place at the overlaps. Screw the first and last ridge caps onto the verge caps.
Calculate how much product you need
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.
Technical features
Dimensions | 1,9 × 86 × 205,3 cm |
---|---|
Variation | Aqua Tile 2M Dark Grey Classic |
EAN | 5413466951109 |
Volume | 1 |
Material | Metal granulated |
Product use | Waterproofing for pitched roofs |
Content indication | Stuk(s) |
Expected lifespan (in years) | 20 |
Maximum inclination | 90 |
Minimum inclination | 10 |
Color | Anthracite |
Thickness (mm) | 2053 |
Length (mm) | 19 |
Width (mm) | 860 |
Surface area (m²) | 1.72 |
Required tools | drill |