Home Products Tile roofing Sheets Aqua Tile Gallo

Aqua Tile Gallo

Metal tile roofing sheet

A universal modular roof tile concept that is suitable for all pitched roofs with a minimum pitch of 10°. The unique concept consists of tile roofing sheets with a soft Mediterranean curve for an elegant, superior look in the colours Dark Grey or Red and matching accessories (e.g. ridge caps, verge caps, screws and ridge cap ends) that allow you to install 20 tiles in one go. Good to know: thanks to its unique concept, Aqua Tile Gallo suits any roof without cutting or trimming.

  • Fast, install 20 tiles in one go
  • Always fits; no cutting or trimming required
  • Strong, durable & lightweight

Step-by-step plan

  1. How does our AQUA TILE system work?
  2. Place a chalk line about 5 cm from the top of the ridge. This will be the top of the top row of roofing sheets.
  3. Place verge caps on both sides of the roof. Distribute them evenly up to the chalk line. Screw them in place with at least 2 screws. Each verge cap is provided with a neutral zone of up to 7.5 cm. This space is used to unify a proportional distribution of plates.
  4. Always work per full row, from left to right and bottom to top.
  5. Distribute the bottom row of sheets evenly between the verge caps and secure them at the bottom with 2 screws.
  6. Screw each sheet in place with the materials developed for this purpose. Use 6 screws (Gallo/Ebena) or 9 screws (Classic) per sheet. Always screw into the valley of the tile about 2 cm below the nose.
  7. The top row of sheets should more or less reach the chalk line.
  8. Then seal the ends of the ridge with a ridge cap end by fixing the end piece on top of the verge caps. Distribute the ridge caps evenly along the entire length of the roof. Screw them in place at the overlaps. Screw the first and last ridge caps onto the verge caps.

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
  • cm
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Technical features

Dimensions 114 × 86 × 3,8 cm
Variation

Aqua Tile Gallo RedAqua Tile Gallo Dark Grey

EAN

54200406622525420040662245

Volume

11

Color

RougeAnthracite

Material

Metal granulatedMetal granulated

Product use

Waterproofing for pitched roofsWaterproofing for pitched roofs

Expected lifespan (in years)

2020

Thickness (mm)

3838

Width (mm)

860860

Surface area (m²)

0.9620.98

Required tools

Drill

Length (mm)

11401140

Content indication

Stuk(s)Stuk(s)

Maximum inclination

9090

Minimum inclination

1010