Basement Protect Epoxy

2-component basement waterproofing

Aquaplan Basement Protect Epoxy is a 2-component epoxy coating for waterproofing basement walls and other underground structures in brick or with cement facing. It is also suitable for floors due to its hard-wearing properties.

Seals underground walls subject to water pressure
Penetrates deep into the substrate and reinforces its structure
Effective and permanent

Find points of sale

Step-by-step plan

Make the substrate dust-free, grease-free and absorbent.
Remove any loose cement, plaster, paint residue, efflorescence and mould with a pressure washer or wire brush.
Seal cracks, fissures and leaks at the cove joint between the floor and wall with Basement Protect Regular Plug.
Rinse the prepared surface thoroughly with water.
Stir components A and B vigorously and separately with a wooden paint stirrer. Then add 1 part component A to 4 parts component B in a clean container (bucket/can). Stir carefully until a homogeneous white colour is obtained.
Never mix more Basement Protect Epoxy than can be processed in 30 minutes at 20°C or 60 minutes at 10°C.
Moisten the substrate and apply Basement Protect Epoxy immediately and evenly in a circular motion with a stiff brush at the rate of 0.25 l/m² per coat.
Apply a second coat after about 8 hours. In exceptional and persistent cases, a third coat may be necessary.

Calculate how much product you need

Worry-free enjoyment starts with accurate measurements! Please double-check your measurements before ordering. You are responsible for ensuring that the dimensions are correct.

Technical features

Variation	1,5L4L
EAN	54134666080035413466608409
Material	EpoxyEpoxy
Product use	WaterproofWaterproof
Volume	1.54
Volume Indication	LL
Color	whitewhite
Suitable for part of building	BasementBasement
Required tools	brushbrush
Minimum processing temperature	55
Maximum application temperature	2525
Drying time (in hours)	88
Overpaintable	TrueTrue
Overpaintable after (hours)	88

Safety features

H-statements	H315 - Causes skin irritation.
	H319 - Causes serious eye irritation.
	H317 - May cause an allergic skin reaction.
	H341 - Suspected of causing genetic damage.
	H411 - Toxic to aquatic organisms, with long lasting effects.
	H318 - Causes serious eye damage.
	H412 - Harmful to aquatic organisms, with long lasting effects.
	H361 - Suspected of damaging fertility or the unborn child .

P-statements	P102 - Keep out of reach of children.
	P273 - Avoid release into the environment.
	P280 - Wear protective clothing.
	P310 - Immediately call a POISON CENTER/doctor/....
	P362 - Remove contaminated clothing.
	P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
	P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. remove contact lenses, if possible; keep rinsing.
	P405 - Keep locked up.
	P501B - Dispose of contents/container in accordance with local regulations.