Home Products Waterproofing Basement Basement Protect Cement Sealer
0
5kg
10kg
20kg

Basement Protect Cement Sealer

Waterproof cement coating

BP Cement Sealer is a white, waterproof cement coating for waterproofing basement walls or other underground structures made of concrete or cement. The cement coating is effective and permanent, even on damp substrates. Small leaks allow dirt and bacteria to enter your basement. Applying BP Cement Sealer prevents this and helps make your basement waterproof.

  • Seals underground walls subject to water pressure
  • Optimum adhesion even to damp substrates
  • Effective and permanent
Find points of sale

Step-by-step plan

  1. Make the substrate dust-free, grease-free and absorbent.
  2. Remove any loose cement, plaster, paint residue, efflorescence and mould with a pressure washer or wire brush.
  3. Seal cracks, fissures and leaks at the cove joint between the floor and wall with BP Leak Stop.
  4. Rinse the prepared surface thoroughly with water.
  5. Mix 5 parts Aquaplan BP Cement Sealer powder with 1 part clean tap water. Mix well until a lump-free mass is formed. It’s ready when the special basement brush can stand upright in the mixture. Allow the mixture to rest for 5 minutes, then stir well again. Do not make more than can be used within 45 minutes.
  6. Moisten the substrate and apply two coats of BP Cement Sealer crosswise with the special basement brush at a rate of 1.5–2 kg/m², depending on the type of substrate. The coat thickness should be at least 1 mm.
  7. Wait about 24 hours before applying the second coat. Lightly moisten the substrate before application.

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
Worry-free enjoyment starts with accurate measurements! Please double-check your measurements before ordering. You are responsible for ensuring that the dimensions are correct.

Accessories

Basement Brush

Basement Brush

  • Helps to apply Basement Protect Cement
  • Easy-to-use brush
  • Covers a large area in one go
View product

Technical features

Variation

5kg10kg20kg
EAN

541346600072254134660007395413466000746
Material

MortarMortarMortar
Product use

WaterproofingWaterproofingWaterproofing
Volume

51020
Volume Indication

KGKGKG
Color

whitewhitewhite
Suitable for part of building

BasementBasementBasement
Required tools

brushbrushbrush
Minimum processing temperature

555
Maximum application temperature

252525
Drying time (in hours)

242424
Overpaintable

TrueTrueTrue
Overpaintable after (hours)

242424

Safety features

H-statements H302 - Harmful if swallowed.
H315 - Causes skin irritation.
H317 - May cause an allergic skin reaction.
H318 - Causes serious eye damage.
H335 - May cause respiratory irritation.
P-statements P102 - Keep out of reach of children.
P261 - Avoid breathing dust/fume/gas/mist/vapour/spray.
P270 - Do not eat, drink or smoke while using this product.
P280 - Wear protective clothing.
P301+P312 - IF SWALLOWED: Call a POISON CENTER/doctor/... if you feel unwell.
P304+P340 - IF INHALED: Remove the person to fresh air and keep them breathing easily.
P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. remove contact lenses, if possible; keep rinsing.
P333+P313 - In case of skin irritation or rash: consult a doctor.
EUH-statements None
Pictograms GHS05 - corrosion
GHS07 - exclamation mark
UFI-code TKUJ-YHNP-Q70J-J2N1
IMDG-code None