Home Products Waterproofing Basement Wall Protect Salt Stop
0

Wall Protect Salt Stop

Prevents salt deposits on your wall

Wall Protect Salt Stop is a salt neutraliser that ensures that the salts inside the bricks crystallise and do not reoccur. This prevents the salts from affecting the appearance of the stone. It also protects the bond with any (waterproof) plaster.

  • Prevents salt deposits
  • Ideal primer for wall products
  • Reduces the transport of moisture
Find points of sale

Step-by-step plan

  1. The substrate must be grease-free and free of loose particles. Brush off any salt efflorescence beforehand.
  2. Depending on the situation, apply one or several coats with a brush or pressure sprayer.
  3. During application and drying, the temperature should not drop below 0°C.
  4. After drying for 4 hours, a subsequent build-up with cement-bonded materials can be applied. Wait at least 24 hours before applying acrylic or silicate paints.
  5. Some salts may surface during the drying process; you can simply brush these off.

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Technical features

Variation

WallProtectSaltStop1lWallProtectSaltStop5l
Volume

15
Product use

blockblock
Suitable for part of building

Outer wallsOuter walls
Required tools

presssure sprayer
Minimum processing temperature

55
EAN

54134669584125413466958429
Material

OtherOther
Volume Indication

LL
Color

Transparent
Maximum application temperature

2525
Drying time (in hours)

2424
Overpaintable

TrueTrue
Overpaintable after (hours)

2424

Safety features

H-statements H315 - Causes skin irritation.
H318 - Causes serious eye damage.
P-statements P102 - Keep out of reach of children.
P280 - Wear protective clothing.
P302 - ON SKIN CONTACT:
P305 - IF IN EYES: → Immediately rinse gently with water.
P310 - Immediately call a POISON CENTER/doctor/....
P313 - Consult a doctor.
P330 - Rinse the mouth.
P338 - Remove contact lenses, if possible. Continue rinsing.
P351 - Rinse gently with water for several minutes.
P352 - Wash with plenty of soap and water.
EUH-statements None
Pictograms None
UFI-code None
IMDG-code UN 1950 Spuitbussen (aerosolen)