Home Products Interior wall Rising damp Wall Protect Inject Cream
0

Wall Protect Inject Cream

Ready-to-use injection gel against rising damp

A solvent-free, ready-to-use injection gel to permanently remedy rising damp in your interior and exterior walls. It’s quick and easy to use. Simply inject with a caulking gun into holes drilled in a horizontal wall joint.

  • Ready-to-use injection gel
  • Effective and permanent
  • Suitable for interior and exterior walls
Find points of sale

Step-by-step plan

  1. For best results, remove skirting boards, panelling, plaster, paint and wallpaper to just above the area to be treated. This will speed up the drying process.
  2. Drill 10 to 12 mm diameter holes every 8 to 12 cm in a horizontal joint 5 to 7 cm above the floor. The depth of the holes varies according to the thickness of the wall. It must be at least 80% of the wall thickness.
  3. Cut open the WALL PROTECT INJECT CREAM tube at the top, cut 1 cm from the nozzle and slide the flexible injection hose over the nozzle.
  4. To inject the gel, insert the injection hose all the way into the hole, withdraw 2 cm, then gently squeeze the caulking gun handle while slowly withdrawing the injection hose from the hole.
  5. Immediately remove any excess product that may have flowed out of the borehole before treating the next borehole.
  6. Seal the drill holes afterwards with mortar.

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Accessories

Wall Protect Inject Cream Hoses

  • Helps to inject Wall Protect Inject Cream
  • Flexible and transparent injection hoses
  • Spreads the gel deep into the wall
View product

Technical features

Dimensions 5 × 5 × 23,4 cm
Variation

WallProtectInjectCream310mlWallProtectInjectCreamKit4+1
Volume

0.311.55
Product use

block rising dampblock rising damp
Required tools

caulking guncaulking gun
Minimum processing temperature

55
Suitable for part of building

Interior walls, Outer wallsInterior walls, Outer walls
EAN

54134669473005413466947355
Material

Silane-siloxaneSilane-siloxane
Volume Indication

LL
Color

whitewhite
Maximum application temperature

2525
Drying time (in hours)

4848
Overpaintable

Not applicableNot applicable
Overpaintable after (hours)

Niet van toepassingNiet van toepassing

Safety features

H-statements None
P-statements P102 - Keep out of reach of children.
EUH-statements EUH208 - Contains . May cause an allergic reaction.
Pictograms None
UFI-code None
IMDG-code None