Transparent

Water-resistant exterior wall coating

A colourless, breathable and water-repellent exterior wall coating for protecting unpainted exterior walls against rain infiltration and dirt. The water-repellent impregnation product ensures that walls remain dry without drastically changing their texture or appearance. The water-repellent paint ensures years of protection against dirt and frost. It’s the ideal solution for damp rooms like your bathroom.

    Step-by-step plan

    1. First make the substrate dust-free. Clean the substrate under high pressure in case of severe soiling.
    2. Remove any paint residue and salt crystals with a hard brush.
    3. Fight green deposits, lichens and algae with Stop Green Deposits.
    4. Seal cracks larger than 0.2 mm with adapted colour mortar or mastic and repair poor grouting.
    5. Make sure the surface is dry before starting.
    6. Apply 2 or more coats of Transparent by brush or roller from top to bottom until the substrate is saturated. Consumption is on average 0.25 L/m²/coat.
    7. Treat small areas at a time and apply layers wet on wet at maximum intervals of 1 hr.

    Calculate how much product you need

    Step 1 of 2

    • cm
    • cm
    * By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

    Technical features

    Dimensions 11,1 × 11,1 × 13,2 cm
    Variation

    Transparent 1 lTransparent 4 l + 20%Transparent 10 l + 20%Transparent 25 l

    EAN

    5413466600304541346694010354134660197485413466019151

    Volume

    14.81225

    Color

    transparenttransparenttransparenttransparent

    Content indication

    LLLL

    Material

    Silane-siloxaneSilane-siloxaneSilane-siloxaneSilane-siloxane

    Product use

    Waterproof and protectWaterproof and protectWaterproof and protectWaterproof and protect

    Suitable for part of building

    Outer wallsOuter wallsOuter wallsOuter walls

    Required tools

    brush or rollerbrush or rollerbrush or rollerbrush or roller

    Minimum processing temperature

    5555

    Maximum processing temperature

    25252525

    Dry time (in hours)

    24242424

    Repaintable

    FalseFalseFalseFalse

    Repaintable after (hours)

    Niet van toepassingNiet van toepassingNiet van toepassingNiet van toepassing

    Safety features

    H-phrases H226 - Flammable liquid and vapour.
    H304 - Can be fatal if swallowed and enters airways.
    H336 - May cause drowsiness or dizziness.
    P-phrases P102 - Keep out of reach of children.
    P210 - Keep away from heat/sparks/open flames/hot surfaces and other ignition sources. - Do not smoke.
    P261 - Avoid breathing dust/fume/gas/mist/vapour/spray.
    P271 - Use only outdoors or in a well-ventilated area.
    P303+P361+P353 - IF ON SKIN (or hair): Remove contaminated clothing immediately. Rinse skin with water/shower.
    P403+P233 - Store in a well-ventilated place. Store in tightly closed container.
    P501B - Dispose of contents/container in accordance with local regulations.
    EUH-phrases EUH066 - Repeated exposure may cause dry or cracked skin.
    Pictograms GHS02 - flame
    GHS07 - exclamation mark
    GHS08 - health hazard
    UFI-code 33AM-X8H5-H00K-YSQY
    IMDG-code UN 3295, Hydrocarbons,liquid, nos,3, III, (36°Cc.c.)