Home Products Coatings Roof coatings Roof Coat Liquid Membrane

Roof Coat Liquid Membrane

Paint your roof watertight with 1 coat

With ROOF COAT LIQUID MEMBRANE, you can make any flat or slightly sloped roof completely waterproof in just one coat. No complicated systems or special tools required. The coating is quick and effortless to apply with a brush or roller.

  • 1 layer
  • Highly elastic
  • Extremely easy

Step-by-step plan

  1. First make sure the surface is dry, dust- and grease-free.
  2. Apply Roof Coat Seam Tape over all seams of the roof surface, except for the transitions between the flat roof and upstands.
  3. Apply Roof Coat Polyester Fleece on all transitions between roof and upstands, corners, penetrations and other critical roof details using the wet-on-wet method: first apply a layer of Flexi Coat Liquid Membrane, then immediately apply the band and press it gently into the coating with a brush or roller.
  4. Pour Roof Coat Liquid Membrane directly onto the roof surface and lightly spread it with a brush or roller at 1 L/m² (layer thickness = ± 2 mm). One coat suffices.

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
  • cm
  • cm
  • cm
  • cm
  • cm
  • cm
  • cm
  • cm
  • cm
  • cm
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Accessories

Technical features

Variation

5L

EAN

5413466901357

Material

Hybrid polymer

Product use

waterproof and repair

Volume

5

Volume Indication

L

Color

Grey

Suitable for part of building

Gutters, Flat roofs

Required tools

foam roller

Minimum processing temperature

5

Maximum application temperature

25

Drying time (in hours)

24

Overpaintable

Not applicable

Overpaintable after (hours)

Niet van toepassing

Safety features

H-statements H317 - May cause an allergic skin reaction.
P-statements P102 - Keep out of reach of children.
P261 - Avoid breathing dust/fume/gas/mist/vapour/spray.
P280 - Wear protective clothing.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P333+P313 - In case of skin irritation or rash: consult a doctor.
P501B - Dispose of contents/container in accordance with local regulations.
EUH-statements None
Pictograms GHS07 - exclamation mark
UFI-code FATM-H8PE-R006-26VD
IMDG-code None