AquaplanT Tray

Green roof sedum plants

The AquaplanT Tray (38 cm x 57 cm) is an all-in-one cassette equipped with substrate and sedum plants. The tray serves as a water buffer. Installation is extremely quick and easy. You only have to click the trays together. Recommended for smaller roofs (< 40 m²). Minimum order = 4.33 m² (20 trays).

  • Easy & fast installation
  • High resistance to wind, heat, frost & dehydration
  • Low-maintenance

Step-by-step plan

  1. The existing roof covering must be in good condition. If in doubt, install an EPDM RUBBER ROOF. Measure the area of your roof in m², rounding up or down.
  2. Install a 30 cm x 30 cm Aquaplan Super Leaf Catcher at the water outlet on the roof and cover it with a concrete tile of the same size.
  3. Place the root-resistant drainage mats on the roofing with the light colour facing up. Unfold the overlap.
  4. Make an even layer of 4 cm with the substrate. Provide a free strip of approx. 15 cm around the SUPER BLADVANGER for a gravel border (2 bags of substrate at 20 litres/bag).
  5. Carefully place vegetation trays on the substrate.
  6. Fill the area around the leaf catcher and, if desired, the roof edges with gravel (type 16/32 mm).
  7. Water the installed sedum plants so the roots can attach to the substrate.
  8. Done! You will see the final result in the summer.

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Technical features

Dimensions 38 × 57 × 20 cm
Variation

AquaplanT Tray 57 x 38 cm

EAN

5413466946600

Volume

1

Color

Vert

Content indication

Stuk(s)

Material

Sedum

Product use

cover

Thickness (mm)

200

Width (mm)

570

Length (mm)

380