Road Repair Asphalt Filler
Repairs asphalt roads
A ready-to-use cold asphalt for the immediate repair and filling of potholes and gaps in asphalt paths, roads, driveways, car parks, etc. The cold asphalt is easy to use. Apply Road Repair Asphalt Filler liberally to the uneven area, tamp it down and you’re done!
- Repairs asphalt
- Easy to apply
- Apply, press and ready!
Step-by-step plan
- Cut out the damaged area, creating straight lines.
- Clean the surface well with a steel brush.
- Remove any water and dirt.
- Place ROAD REPAIR ASPHALT FILLER in the cavity at a rate of 25 kg/m² per cm thickness and spread it out with a rake. Tamp it down with a stamper or other suitable tool.
- When working in high temperatures, sprinkle some sand on the ROAD REPAIR ASPHALT FILLER.
- After compaction, the layer of ROAD REPAIR ASPHALT FILLER should not be thicker than 3 cm. If the damage is deep, a layer of crushed stone (calibre 0/22) should be applied and tamped down first.
Calculate how much product you need
Worry-free enjoyment starts with accurate measurements! Please double-check your measurements before ordering. You are responsible for ensuring that the dimensions are correct.
Technical features
| Variation | 25kg |
|---|---|
| EAN | 5410661601327 |
| Material | Bitumen |
| Product use | filling |
| Volume | 25 |
| Volume Indication | KG |
| Color | black |
| Suitable for part of building | Ground floor |
| Required tools | steel brush, rake, pestle |
| Minimum processing temperature | 5 |
| Maximum application temperature | 35 |
| Drying time (in hours) | 24 |
Safety features
| H-statements | None |
|---|
| P-statements | None |
|---|
| EUH-statements | None |
|---|
| Pictograms | None |
|---|
| UFI-code | None |
|---|
| IMDG-code | None |
|---|
Related products
Our cookies are watertight
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.
The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance by your Internet Service Provider, or additional data from a third party, information stored or retrieved solely for this purpose cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles for sending advertising, or to track the user on a website or across multiple websites for similar marketing purposes.