Basement Protect Cement Sealer

Waterproof cement coating

BP Cement Sealer is a white, waterproof cement coating for waterproofing basement walls or other underground structures made of concrete or cement. The cement coating is effective and permanent, even on damp substrates. Small leaks allow dirt and bacteria to enter your basement. Applying BP Cement Sealer prevents this and helps make your basement waterproof.

Seals underground walls subject to water pressure
Optimum adhesion even to damp substrates
Effective and permanent

Find points of sale

Step-by-step plan

Make the substrate dust-free, grease-free and absorbent.
Remove any loose cement, plaster, paint residue, efflorescence and mould with a pressure washer or wire brush.
Seal cracks, fissures and leaks at the cove joint between the floor and wall with BP Leak Stop.
Rinse the prepared surface thoroughly with water.
Mix 5 parts Aquaplan BP Cement Sealer powder with 1 part clean tap water. Mix well until a lump-free mass is formed. It’s ready when the special basement brush can stand upright in the mixture. Allow the mixture to rest for 5 minutes, then stir well again. Do not make more than can be used within 45 minutes.
Moisten the substrate and apply two coats of BP Cement Sealer crosswise with the special basement brush at a rate of 1.5–2 kg/m², depending on the type of substrate. The coat thickness should be at least 1 mm.
Wait about 24 hours before applying the second coat. Lightly moisten the substrate before application.

Calculate how much product you need

Worry-free enjoyment starts with accurate measurements! Please double-check your measurements before ordering. You are responsible for ensuring that the dimensions are correct.

Accessories

Technical features

Variation	5kg10kg20kgBasement Protect Cement 25kg : white
EAN	5413466000722541346600073954134660007465413466023691
Material	MortarMortarMortarMortar
Product use	WaterproofingWaterproofingWaterproofingWaterproofing
Volume	5102025
Volume Indication	KGKGKGKG
Color	whitewhitewhitewhite
Suitable for part of building	BasementBasementBasementBasement
Required tools	brushbrushbrushbrush
Minimum processing temperature	5555
Maximum application temperature	25252525
Drying time (in hours)	24242424
Overpaintable	TrueTrueTrueTrue
Overpaintable after (hours)	24242424

Safety features

H-statements	H302 - Harmful if swallowed.
	H315 - Causes skin irritation.
	H317 - May cause an allergic skin reaction.
	H318 - Causes serious eye damage.
	H335 - May cause respiratory irritation.

P-statements	P102 - Keep out of reach of children.
	P261 - Avoid breathing dust/fume/gas/mist/vapour/spray.
	P270 - Do not eat, drink or smoke while using this product.
	P280 - Wear protective clothing.
	P301+P312 - IF SWALLOWED: Call a POISON CENTER/doctor/... if you feel unwell.
	P304+P340 - IF INHALED: Remove the person to fresh air and keep them breathing easily.
	P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. remove contact lenses, if possible; keep rinsing.
	P333+P313 - In case of skin irritation or rash: consult a doctor.