Home Products Interior wall Condens Wall Protect Condensation Stop

Wall Protect Condensation Stop

An insulating condensation stopper

A decorative wall and ceiling coating with insulating properties for surfaces affected by condensation. It helps limit the effects of condensation on walls and ceilings and is easy to apply.

  • Eliminates moisture and mould caused by condensation
  • The treated surface feels noticeably warmer; enhances comfort in the room
  • Strong and homogeneous bonding that prevents moisture and air bubbles and makes blistering impossible

Step-by-step plan

  1. First remove all dust and grease from the substrate. Thoroughly remove any mould with a stiff brush and water.
  2. Fix and saturate highly absorbent substrates such as new plaster and plasterboard with one coat of water-based wall paint.
  3. Apply one undiluted coat of Wall Protect Condensation Stop with a roller or brush at a rate of approx. 0.16 l/m² per coat.
  4. After about 4 hours, apply a second undiluted coat for a better insulating effect. Use a smooth, rough or special embossing roller to achieve the desired aesthetic effect. The surface can be wallpapered after 24 hours.
  5. In this case, choose the smoothest finish.

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
Worry-free enjoyment starts with accurate measurements! Please double-check your measurements before ordering. You are responsible for ensuring that the dimensions are correct.

Technical features

Variation

2,5L5L

EAN

54134666063065413466606504

Material

AcrylicAcrylic

Product use

Prevention of condensationPrevention of condensation

Volume

2.55

Volume Indication

LL

Color

whitewhite

Suitable for part of building

Interior wallsInterior walls

Minimum processing temperature

55

Maximum application temperature

2525

Drying time (in hours)

44

Overpaintable

TrueTrue

Overpaintable after (hours)

44

Safety features

H-statements H317 - May cause an allergic skin reaction.
P-statements P102 - Keep out of reach of children.
P261 - Avoid breathing dust/fume/gas/mist/vapour/spray.
P280 - Wear protective clothing.
P303+P361+P353 - IF ON SKIN (or hair): Remove contaminated clothing immediately. Rinse skin with water/shower.
P333+P313 - In case of skin irritation or rash: consult a doctor.
P501B - Dispose of contents/container in accordance with local regulations.
EUH-statements EUH208 - Contains . May cause an allergic reaction.
Pictograms GHS07 - exclamation mark
UFI-code P360-20J4-Y004-TGF4
IMDG-code None